Investigation of the influence of the concentration of the shungite filler on the optical properties, morphology and molecular structure of the polyimide film

Авторлар

  • A.D. Muradov Әл-Фараби атындағы Қазақ Ұлттық университетi Алматы қ., Қазақстан
  • G.Sh. Yar-Mukhamedova Әл-Фараби атындағы Қазақ Ұлттық университетi Алматы қ., Қазақстан
  • S.B. Mukhambetova Әл-Фараби атындағы Қазақ Ұлттық университетi Алматы қ., Қазақстан
  • K.B. Cheryazdanov Әл-Фараби атындағы Қазақ Ұлттық университетi Алматы қ., Қазақстан
  • K.M. Amyrkhanova Әл-Фараби атындағы Қазақ Ұлттық университетi Алматы қ., Қазақстан
  • Zh.A. Alyeva Әл-Фараби атындағы Қазақ Ұлттық университетi Алматы қ., Қазақстан
        67 28

Кілттік сөздер:

polyimide film, classification of fillers, Raman spectroscopy, atomic force microscopy, optical property

Аннотация

In the present work, the influence of the concentration of shungite filler on surface morphology, optical properties, molecular structure of polyimide films was investigated. Shungite was used in four different concentrations. In all the samples obtained, changes can be traced depending on the concentration of the filler. The surface of the film becomes smoother with increasing filler concentration. The addition of filler does not greatly affect the photoluminescent spectrum of the films, since the polyimide has a high resistance to radiation. One of the main properties of polyimide is high resistance to heat, resistance to radiation, stability in organic solutions and other valuable properties. For the analysis of structural elements, the Raman scattering method was used. Investigation of the morphology of the surface of polyimide films is carried out using an atomic force microscope. The size of the shungite filler was determined using an optical microscope Leica DM 6000 M. Due to the inhomogeneity of shungite concentrations, a graph of the change in the transmission coefficient of light is given. Under normal conditions of mechanical stress, as well as for polyimide, mechanical and physical quantities, methods for studying the influence of mechanical weight are considered. As a result of studies of the strength of a polyimide film, as well as a change in the optical properties, we determined that the optical and mechanical properties of polyimide films depend not only on the appearance of the filler but also on its concentration.

Библиографиялық сілтемелер

1 Крыжaнoвский В.К., Бурлoв В.В. и др. Тeхнические свoйства пoлимерных материалов. – СПб.: Прoфессия, 2005 – 248 с.
2 Krotо H.W., Hеath J.R., О’Brien S.C. C60: Buckmіnsterfullerene // Nаture. – 1985. – V. 318. – P.162-168.
3 Канцельсон М.Ю., Балаев Г.А. Полимерные материалы: Справочник. - Л.: Химия, 1982. - 317 с.
4 Гуняев Г.М. Строение и свойства полимерных волокнистых композиционных материалов – М.: Химия. 1981.- 210 с.
5 Полимерные композиционные материалы: структура, свойства, технология: учеб.пособие/ М.Л Кербер, В.М. Виноградов, Г.С. Головкин и др.; под ред. А.А.Берлина. – СПб.: Профессия, 2008 – 560 с..\
6 Игнатов С.Г. и др. Применение АСМ для специфической визуализации микроорганизмов // Мат. VI Всерос. науч.-практ. конф. с междунар. участием «Молекулярная диагностика – 2007». – 2007. – Т. 1. – С. 81-82.
7 Maluchenko N.V., Agapov I.I., Tonevitsky A.G. et al. Detection of immune complexes using atomic force microscopy // Biofizika. – 2004. – V. 49. – № 6. – Р. 1008–1014.
8 Сагалаев Г.В. В кн. “Наполнители полимерных материалов: материалы семинаров”, Москва, о-во “Знание” РСФСР, 1969. – C.18-29.
9 Зoндoвaя НанoЛаборатoрия ИНТEГРА Спектрa (конфигурация Inverted) / Руководство пользователя. - Мoсква, Зеленoград. - 2007. - 73 c.
10 Karpinosa K. Handbook of composites, ed. by G. Lubin, N.Y., 1982.
11 Джуманов С., Ашуров М.X., Курбанов А.М., Худжакулов Д.Ч. - В кн.: Тезисы докладов Международной конференции радиационному материаловедению. Харьков.- 1990.-T.3- с.75.

References
1 V.K. Kryzhanovskiy, V.V. Burlov i dr. Tekhnicheskiye svoystva polimernykh materialov. – SPb.: Professiya, 2005 – 248 s. (in russ).
2 H.W. Krotо, J.R. Hеath, S.C. О’Brien, Nаture, 318, 162-168, (1985).
3 M.Yu. Kantsel'son, G.A. Balayev Polimernyye materialy: Spravochnik. - L.: Khimiya, 1982. - 317 s. (in russ).
4 G.M. Gunyayev Stroyeniye i svoystva polimernykh voloknistykh kompozitsionnykh materialov – M.: Khimiya. 1981.- 210 s. (in russ).
5 Polimernyye kompozitsionnyye materialy: struktura, svoystva, tekhnologiya: ucheb.posobiye/ M.L Kerber, V.M. Vinogradov, G.S. Golovkin i dr.; pod red. A.A. Berlina. – SPb.: Professiya, 2008 – 560 s. (in russ).
6 Ignatov S.G. i dr., Mat. VI Vseros. nauch.-prakt. konf. s mezhdunar. uchastiyem «Molekulyarnaya diagnostika – 2007», 1, 81-82, (2007). (in russ).
7 N.V. Maluchenko, I.I. Agapov, A.G. Tonevitsky et al., Biofizika, 49(6), 1008-1014, (2004).
8 G.V. Sagalayev. V kn. “Napolniteli polimernykh materialov: materialy seminarov”, Moskva, o-vo “Znaniye” RSFSR, 1969. – C.18-29. (in russ).
9 Zondovaya NanoLaboratoriya INTEGRA Spektra (konfiguratsiya Inverted) / Rukovodstvo pol'zovatelya. - Moskva, Zelenograd. - 2007. - 73 s. (in russ).
10 Karpinosa K. Handbook of composites, ed. by G. Lubin, N.Y., 1982.
11 Dzhumanov S., Ashurov M.X., Kurbanov A.M., Khudzhakulov D.CH. - V kn.: Tezisy dokladov Mezhdunarodnoy konferentsii radiatsionnomu materialovedeniyu. Khar'kov.- 1990.-T.3- s.75.

Жүктелулер

Как цитировать

Muradov, A., Yar-Mukhamedova, G., Mukhambetova, S., Cheryazdanov, K., Amyrkhanova, K., & Alyeva, Z. (2018). Investigation of the influence of the concentration of the shungite filler on the optical properties, morphology and molecular structure of the polyimide film. ҚазНУ Хабаршысы. Физика сериясы, 60(1), 52–60. вилучено із https://bph.kaznu.kz/index.php/zhuzhu/article/view/513

Шығарылым

Бөлім

Физика конденсированного состояния и проблемы материаловедения. Нанонаука

Статті цього автора (авторів), які найбільше читають